RadioLink AT10II 10 Channel Transmitter with Receiver

Description

Details

Brand Name: RadioLink
Color: Orange
Item Name: AT10II Transmitter with Receiver

Specification Of the AT10II Transmitter:

Frequency	2.4GHz ISM band(2400MHz to 2485MHz)
Modulation Mode	QPSK
Channel Bandwidth	5.0MHz
Spread Spectrum	DSSS, FHSS
Adjacent Channel Rejection	>38dBM
Transmitter Power	<100mW(PCB testing), <20dBm(3 meter air testing)
Operating Current	<95mA
Operating Voltage	8.6~15V
Control Distance	800 meters ground
Channel	10 Channel
Simulator Mode	Under the simulator model the transmitter action turn off, change to power saving model
Screen	16 colorful screen Size 78 x 52mm 320*480 pixel
Compatible Model	Include all 120 degree and 90 degree swash plate helicopter, all fix wing and glider, five flying model.
Size	18 x 9.5 x 22cm
Weight	0.95kg

Specification Of R10DS Receiver:

Frequency	2.4GHz
Channel	10CH, support SBUS and PWM signal output
Working Voltage	4.8-10V
Working Current	38-45mA
Dimension	50x31.5x14.5mm
Weight	14g

Two signal working mode of R10DS:

Red LED always, SBUS and PWM signal working at the same time, 10 channels totally.

(1) PWM signal output: PWM signal output from row 1 to row 10(CH1 to CH10).

(2) SBUS signal output : row eleven support SBUS signal output.

How to match code with transmitter:

1. Place the transmitter and the receiver close to each other within 1 meters.

2. Turn on the transmitter, then power on the R10DS.

3. Connect CH3 of R10DS to ESC.

4. There is a black button on the R10DS, use a thin stick press the button twice in two seconds and release, receiver light start blinking, after about 8 times blinking, match code success when receiver signal LED always on.

Features:
Upgraded version of Radiolink AT10,with DSSS and FHSS dual signal
Higher accuracy of anti-interference and transmitter control bars than AT10.
Support English & Chinese Menu
Multiple function remote control system
Including helicopter, airplane and slider three type flying machine and five models, cover almost every popular model, you can fly any model by this radio.
3.5 inch colorful screen 320×480 resolution, clear display menu and graphs.
Fast response time only 3ms to the operation, faster than the other transmitter 20ms,even ten channels also let you feel it.
High channel resolution reaches 4096,0.25us per resolution let all the servos keep tranquil.
Strong anti-jumping, DSSS(Direct sequence spread spectrum) technology.

Receiver integrate telemetry sensor including signal strength and voltage.

Support extended engine voltage telemetry module PRM-01 can feedback GPS info, Speed, voltage etc. on AT10II display when work with flight controller APM or PIX.

Note: The AT10II transmitter is NOT compatible with R10D receiver.

Package included:

1 x Radiolink AT10II 10 Channel transmitter

1 x Receiver
1 x PRM-01 module

Reviews