Solution | 1/3" High Sensitivity CMOS | |
---|---|---|
WDR | support | |
TV System | PAL/NTSC (based on country) | |
Resolution | 650tvl | |
Synchronization | internal | |
Min. Illumination | 0.1Lux | |
S/N Ratio | ≥52dB | |
White Balance | AUTO | |
WDR |
NORMAL/WDR |
|
Mirror | AUTO | |
D/N | CDS/COLOR | |
AGC | HIGH/MID/LOW/OFF | |
Video Output | 1.0Vp-p, 75ohm | |
DNR | 2D-DNR | |
Power | DC12V±10% | |
Current | 55mA±10% | |
Size | 32X32 mm | |
Operating Temperature | -10C~50C | |
Operating Humidity | <90% | |
Storage Humidity | 20~95% | |
Package Includes | 1 x camera; 1 x manual; 1 x cable |
The camera signsl doesnt make a difference as it's just a signal, the MINIMOSD is only layered on the cam signaL going to the vtx.
2015-07-14
|
||
For Some Reason MWOSD Firmware or any other at that matter will not recognize MinimOSD, at all, works with some others OSDs i have, have tested multiple cameras on multiple differnt MinimOSD based systems and non worknCamera will not display the OSD at All, i do not understandnother then that the camera works great
2015-06-17
|